Guide 1 • Technology
When you visit a location utility like My Location Lab, the browser relies on the W3C Geolocation API. Rather than possessing a single tracking method, modern operating systems use a hybrid location provider that combines several signals:
- GNSS Satellite Receivers: Phones, tablets, and modern laptops with GNSS chips listen to radio signals from GPS (US), GLONASS (Russia), Galileo (Europe), and BeiDou (China). Under an open sky, this yields precision within 3 to 5 meters.
- Wi-Fi BSSID Positioning: In urban canyons or indoors where satellite signals cannot penetrate concrete, devices scan nearby Wi-Fi router MAC addresses (BSSIDs). Cloud databases map these signals to precise geographic coordinates.
- Cellular Tower ID: Mobile devices measure the signal strength and timing advance of surrounding cell towers to triangulate a location within a few hundred meters.
- IP Geolocation (Fallback): If all hardware signals are unavailable, web servers look up your public IP address in routing registries. This provides approximate city or region-level data (within 10 to 50 km).
You can verify your current device's hardware reporting accuracy with our GPS Accuracy Checker, compare it to network IP routing using the IP Location Lookup Tool, or read our in-depth tutorial in the full Browser Geolocation Guide →
Guide 2 • Troubleshooting
If you click "Get My Location" and see a permission error, your browser has blocked location access for this domain or your device's system-level location services are turned off (learn how browser geolocation requests work). Here is how to fix it on major platforms:
Google Chrome (Desktop & Android)
Click the padlock or tune icon on the left side of the address bar. Set Location to Allow, then reload the page.
Apple Safari (iPhone & iPad iOS)
Open Settings → Privacy & Security → Location Services. Ensure Location Services is ON. Scroll down to Safari Websites and select While Using the App with Precise Location enabled.
Apple Safari (macOS)
Open System Settings → Privacy & Security → Location Services. Make sure both Location Services and Safari are checked.
Prefer not to grant GPS access? Use our IP Location Lookup or browse points manually on our Interactive Maps. For complete instructions across Edge and Firefox, see the full Permission Troubleshooting Guide →
Guide 3 • Formats & Standards
Any point on Earth can be pinpointed using an intersecting grid of latitude (north-south) and longitude (east-west) lines referenced to the equator and the Prime Meridian in Greenwich, England. You can find your current coordinates with our GPS Coordinates Finder:
- Decimal Degrees (DD): e.g.,
37.774929, -122.419416. Standard for web mapping (Google Maps, Leaflet, OpenStreetMap) and software development. Six decimal places provide precision down to approximately 11 centimeters (4.3 inches).
- Degrees Minutes Seconds (DMS): e.g.,
37° 25' 19.7" N, 122° 05' 06.0" W. Traditional format used in marine navigation, aviation charts, and topographic surveys. Each degree divides into 60 minutes, and each minute into 60 seconds.
- UTM (Universal Transverse Mercator): Divides the Earth into 60 numbered north-south zones, specifying position in meters east (Easting) and meters north (Northing). Commonly used in military logistics and civil surveying.
- MGRS (Military Grid Reference System): NATO's standardized alphanumeric coordinate system derived from UTM and UPS grids, e.g.,
10SEG0482156824.
Need to convert between formats? Use our instant Coordinate Converter, test the UTM Converter, or read our deep-dive in the full Coordinate Systems Guide →
Guide 4 • Geocoding
GPS hardware only reports numbers: latitude, longitude, and elevation. To turn those numbers into an address like "1600 Amphitheatre Pkwy, Mountain View, CA", the browser performs Reverse Geocoding:
My Location Lab queries the global OpenStreetMap gazetteer (Nominatim). Nominatim looks up the nearest mapped road geometry, calculates street interpolation along parcel blocks, and queries municipal boundaries to return your exact street, city, county, state, and postal code.
You can look up any street address using the Address Finder, convert coordinates with the Reverse Geocoder, or read the complete Reverse Geocoding Guide →
Guide 5 • Elevation & Altitude
While people often use "altitude" and "elevation" interchangeably, geodesists treat them differently:
- Elevation: The vertical distance of a ground location above Mean Sea Level (MSL), calculated against the Earth's gravitational geoid model (EGM96/EGM2008).
- GPS Altitude: The mathematical height reported by satellite receivers above the reference ellipsoid (WGS84), which can differ from true sea level by up to 100 meters depending on local gravitational anomalies.
Check your exact height above sea level with our satellite-referenced Elevation Finder, inspect elevation profiles on our Interactive Maps, or read the full Altitude vs Elevation Guide →
Guide 6 • Outdoor & Solar
When navigating outdoors without cell connectivity, combining raw coordinates with directional heading and celestial positioning is essential:
- Magnetic North vs True North: Smartphone magnetometers detect the Earth's geomagnetic field (Magnetic North). The angle difference between Magnetic North and True Geographic North (the North Pole) is known as Magnetic Declination. Modern navigation tools apply the World Magnetic Model (WMM) to convert between them.
- Solar Noon & Sun Position: Solar noon occurs when the sun crosses the local celestial meridian and reaches its highest elevation in the sky. In the Northern Hemisphere, your shadow at solar noon points due North, providing an analog heading check.
- Geocaching & Waypoint Navigation: Geocaching relies on storing coordinate waypoints and calculating the great-circle distance and bearing (using the Haversine formula) to locate hidden caches in the field.
Try our digital Compass Heading, calculate transit times with our Sun Position & Solar Noon Tool, explore waypoints with the Geocaching Helper, or read the full Compass & Solar Navigation Guide →